Verdict
All guidesResearchMethodologyAboutContact
Head-to-head · Best Air Quality Monitors

Atmotube PRO 2 vs Qingping Air Quality Monitor Gen 2

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.
The short answer

Qingping Air Quality Monitor Gen 2 comes out ahead by a clear margin (4.2 vs 4.6). The gap is mostly about accuracy-focused buyers — read the strengths below before deciding.

Atmotube PRO 2
Ranked #3 in Best Air Quality Monitors
Atmotube PRO 2
4 sources$159as of Aug 1

The Atmotube Pro 2 is a meaningful step up from its predecessor, adding a carbon dioxide sensor and sharpening sensor accuracy. Reviewers noted it measures PM2.5, NOx, and TVOC with high correlation to reference standards, though some users reported problems with CO2 calibration. GPS and USB-C data access make it more useful for field research and personal monitoring. It does well on outdoor exposure tracking and data collection, while the carbon dioxide sensor's reliability remains a concern for some users. Researchers and health-conscious individuals who want comprehensive air quality data are the fit, but anyone who requires highly accurate CO2 measurements should look elsewhere.

Strengths
  • — Includes carbon dioxide sensor (Sensirion STCC4) for indoor air quality monitoring
  • — Upgraded PM sensor (Sensirion SPS30) provides accurate particle concentration measurements
  • — Built-in GPS and accelerometer enable location-aware data collection without excessive battery drain
Watch-outs
  • — Carbon dioxide measurements have reported systematic calibration issues
  • — Initial CO2 readings required manual adjustment to align with reference standards
  • — Some users experienced inconsistent performance with CO2 sensor accuracy
$159 · Buy at store.atmotube.comFull review →
Qingping Air Quality Monitor Gen 2
Higher ratedRanked #1 in Best Air Quality Monitors
Qingping Air Quality Monitor Gen 2
3 sources1 derived$149.99as of Aug 1

The Qingping Air Quality Monitor Gen 2 earns praise for accurate sensors, including a high-quality Sensirion SCD40 CO2 sensor and a replaceable PM2.5 sensor, which puts it among the top performers in its class. Reviewers noted the multiple air quality metrics on the display and compatibility with both the Qingping+ and Mi Home apps. Battery life is poor and the app has connectivity issues, which can make the device frustrating to use. It fits users who put accuracy and sensor quality ahead of battery longevity and app reliability.

Strengths
  • — Uses high-quality Sensirion SCD40 NDIR CO2 sensor with accuracy of ±(50 ppm + 5% of reading)
  • — Displays seven data points including PM2.5, PM10, CO2, eTVOC, temperature, humidity, and noise level
  • — Features replaceable PM2.5 sensor for easy maintenance without replacing the entire device
Watch-outs
  • — Poor battery life lasting only up to 4 hours, often much less
  • — Connectivity issues with the app including long wait times and firmware update failures
$149.99 · Check Price on AmazonFull review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Atmotube PRO 2

The Atmotube PRO 2 provides improved PM sensor accuracy and GPS tracking, but its CO2 sensor has reported calibration issues that make it less reliable than the Qingping Gen 2, which offers consistent Sensirion sensor performance. While it's better suited for field research than the Awair Element, which lacks GPS capabilities, the Atmotube PRO 2's CO2 accuracy problems make it less ideal for users requiring precise carbon dioxide monitoring.

Qingping Air Quality Monitor Gen 2

The Qingping Gen 2 features the high-quality Sensirion SCD40 CO2 sensor, which outperforms the CO2 accuracy of the Awair Element and Atmotube PRO 2, but it suffers from poor battery life compared to the Temtop M10, which offers up to 6 hours of battery operation. While it provides replaceable sensors, the app connectivity issues make it less reliable than the AirGradient One, which offers seamless integration and better overall user experience.

Specs side-by-side

SpecAtmotube PRO 2Qingping Air Quality Monitor Gen 2
SensorsSensirion SPS30Sensirion SCD40, Sensirion SGP40, GrandWay Sensor
ConnectivityBluetooth 5.0Wi-Fi, Qingping+ App, and Mi Home App
Power Source2300 mAhBattery (up to 4 hours) + USB-C
DisplayNone4-inch touch screen
Dimensions3.39 x 1.97 x 0.87 in2.91 x 4.09 x 3.35 in
Weight0.23 lb0.55 lb
AppAtmotube AppQingping+ App and Mi Home App
MeasurementsPM1, PM2.5, PM10, TVOC, NOx, CO2, Temp, Humidity, PressurePM2.5, PM10, CO2, eTVOC, Temperature, Humidity (RH), and Noise Level
← See the full ranking of best air quality monitors