Verdict
All guidesResearchMethodologyAboutContact
Head-to-head · Best Resin 3d Printers

Anycubic Photon Mono 4 Ultra vs Anycubic Photon P1

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.
The short answer

Anycubic Photon P1 comes out ahead by a narrow margin (4.1 vs 4.3). The gap is mostly about Prosumer users wanting advanced resin printing features — read the strengths below before deciding.

Anycubic Photon Mono 4 Ultra
Ranked #5 in Best Resin 3d Printers
Anycubic Photon Mono 4 Ultra
3 sources2 derived$329.99as of Aug 1

The Anycubic Photon Mono 4 Ultra is a compact resin 3D printer designed for detailed small-format prints, particularly gaming accessories. Reviewers noted its mono light engine delivers better resolution and light energy than standard RGB panels. The printer ships extremely well packed with multiple protective films, though this adds complexity to setup. Users appreciate its support for high-speed resins and its suitability for intricate models. However, some found the assembly process cumbersome due to misaligned protective films and inconsistent power supply accessories. It's best suited for users seeking precision over large build volumes.

Strengths
  • — Features a mono light engine for better resolution and light energy compared to standard RGB-tinted panels
  • — Well-packed with protective films and accessories, ensuring safe shipment and setup
  • — Supports high-speed printing with Anycubic's High Speed Resin, offering faster print times
Watch-outs
  • — Includes excessive protective films that are difficult to align properly during setup
  • — Power cord shipped with European plug; lacks standard three-wire connector in included accessories
  • — Instructions are light on safety aspects and lack clarity for some assembly steps
$329.99 · Check Price on AmazonFull review →
Anycubic Photon P1
Higher ratedRanked #2 in Best Resin 3d Printers
Anycubic Photon P1
4 sources$619.99as of Aug 1

The Anycubic Photon P1 is a high-end resin 3D printer featuring a 14K mono LCD, thermally-controlled resin vat, and dual-material printing capability. Reviewers noted its powerful light system, precision build platform, and auto-leveling features. However, it lacks automated resin filling and the dual-material vat does not include heating. The printer is designed for industrial-grade prosumer use with a 223 x 126 x 230 mm build chamber and weighs 13.6kg. It's suited for users seeking advanced resin printing features but may not appeal to those wanting fully automated workflows.

Strengths
  • — 14K mono LCD with 16.8 x 24.8 μm resolution and LighTurbo 4.0 engine delivering 5000μW/cm² with ≥2° collimation accuracy
  • — Thermally-controlled resin vat capable of maintaining temperatures up to 40°C for optimized resin flow
  • — Dual-material printing capability with dedicated kit for simultaneous color/material printing
Watch-outs
  • — No automated resin filling system
  • — Dual-material vat lacks heater, potentially limiting material options
$619.99 · Check Price on AmazonFull review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Anycubic Photon Mono 4 Ultra

The Anycubic Photon Mono 4 Ultra excels in precision with its mono light engine, offering better resolution than standard RGB panels, unlike the Elegoo Mars 5 Ultra or Formlabs Form 4.

Anycubic Photon P1

The Anycubic Photon P1 offers a 14K mono LCD and thermally-controlled resin vat, outperforming the Elegoo Mars 5 Ultra in resolution and temperature control.

Specs side-by-side

SpecAnycubic Photon Mono 4 UltraAnycubic Photon P1
Build Volume154.22 x 87.04 x 165 mm223 x 126 x 230 mm
Light SourceMono (single color cells)LighTurbo 4.0
UV Wavelength405nm resin, including Anycubic High Speed Resin405nm
MaterialABS, Aluminum, PolycarbonateAluminum
Dimensions15"D x 10"W x 20"H28"D x 14"W x 13"H
Weight4 kg13.6 kg
Display Resolution10K16.8μm*24.8μm
Pixel Size17 x 17 μm16.8 x 24.8 μm
Print Speed120mm/h25-35 mm/h
Layer Height0.02-0.15 mm0.012-0.15 mm
← See the full ranking of best resin 3d printers