Verdict
All guidesResearchMethodologyAboutContact
Head-to-head · Best Laser Engravers

Atomstack A5 Pro vs Ortur Laser Engraver 4

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.
The short answer

Atomstack A5 Pro and Ortur Laser Engraver 4 score essentially the same (4.0 vs 4.0). Pick the one whose trade-offs match your priorities — the strengths and watch-outs below are where they actually differ.

Atomstack A5 Pro
Ranked #3 in Best Laser Engravers
Atomstack A5 Pro
4 sourcesall derived$143.09as of Jul 31

The Atomstack A5 Pro is a 20W diode laser engraver whose fixed focus design keeps operation simple. Reviewers found it easy to assemble and liked the included protective shroud, but noted it has no endstops for automatic positioning. Optical output measures 5-5.5W, well under the electrical input rating. It runs standard laser software and handles wood, plastic, and leather. Beginners and hobbyists who want straightforward engraving are the audience.

Strengths
  • — Fixed focus laser design eliminates need for manual focusing
  • — Includes protective acrylic shroud for added safety
  • — Supports multiple engraving materials including wood, plastic, and leather
Watch-outs
  • — No endstops included for automatic homing
  • — Laser output power is 5-5.5W despite 20W input rating
$143.09 · Check Price on AmazonFull review →
Ortur Laser Engraver 4
Ranked #6 in Best Laser Engravers
Ortur Laser Engraver 4
2 sources1 derived$279as of Aug 1

The Ortur Laser Master 3 is a high-end engraver and cutter with a 20W modular laser that moves at 20000 mm/min, aimed at professionals and experienced hobbyists. Reviewers liked the sleek open-frame design and the full set of accessories, while flagging a complicated assembly and a basic air assist pump. It works well on wood, acrylic, glass, and aluminum, with specific settings recommended for each. Newcomers to laser technology should start somewhere else.

Strengths
  • — 20W modular laser module for high-power engraving and cutting
  • — 20000 mm/min maximum speed for efficient operation
  • — Open-frame design with sleek low-profile build and concealed wiring
Watch-outs
  • — Requires significant assembly effort with disassembled main components
  • — Not suitable for beginners due to complexity of setup and alignment
$279 · Buy at business.walmart.comFull review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Atomstack A5 Pro

The Atomstack A5 Pro's fixed focus design and protective shroud make it more beginner-friendly than the Ortur Laser Engraver 4, which requires complex alignment. However, it's less powerful than the xTool D1 Pro and lacks the large cutting area and included software tutorials that make the D1 Pro more accessible.

Ortur Laser Engraver 4

The Ortur Laser Engraver 4 surpasses the xTool D1 Pro in power with its 20W modular laser and high-speed operation, but it requires more complex setup and lacks the included tutorials and ease of assembly that the D1 Pro provides. It also doesn't match the xTool P2's built-in fume extraction or the Atomstack P50 Pro's air assist system.

Specs side-by-side

SpecAtomstack A5 ProOrtur Laser Engraver 4
Laser Power20W20W
Work Area410*400mm15.74" x 15.74" (400 x 400 mm)
Weight8.82 lb14.3 lb
Laser TypeDiode LaserCO2 laser cutter
Machine Size410 x 400 mm600mm*570mm*130mm
MaterialAluminium AlloyMetal
SoftwareATOMSTACK Studio SoftwareLightBurn (Paid), LaserGRBL (Free)
Max Speed—20000 mm/min
← See the full ranking of best laser engravers