The Steelfire 22 heats from cold to searing temperatures in approximately seven minutes, reaching over 460°F quickly thanks to its single 14,000-BTU racetrack burner. The Barbecue Lab found that the three-ply 304 stainless steel surface resists rust and eliminates cold corners, though it requires no seasoning unlike traditional griddles. However, the oval shape lacks defined zones, making food placement less intuitive than rectangular designs, and users must purchase a separate long-nipple adapter to connect to standard 20-lb propane tanks. This portable tabletop unit fits campers seeking quick searing on stainless steel but may frustrate those accustomed to traditional griddle layouts or bulk fuel connections.

Full review
Oval stainless steel surface eliminates seasoning
The Steelfire 22 features a multi-ply cooking top constructed from 304-grade stainless steel, marking a departure from the cold-rolled steel and cast iron surfaces found on most outdoor griddles. The Barbecue Lab highlighted this material choice as a category disruptor for the sub-one-thousand-dollar market, noting that unlike traditional steel tops which require constant seasoning to prevent rusting, 304 stainless is inherently resistant to corrosion. This means users can leave the unit exposed to the elements without worrying about surface degradation or flavor contamination from flaking seasoning layers.
The oval shape of this cooking surface further distinguishes it from the rectangular designs that dominate brands like Blackstone and Weber. The Barbecue Lab observed that while most rectangular griddles only heat in an oval pattern leaving cold corners, the Steelfire 22 utilizes its geometry to eliminate those dead zones entirely. However, reviewers noted a practical trade-off with this design; without distinct corners or edges to define cooking zones, users may find it initially difficult to intuitively organize their food placement compared to traditional flat-top layouts.
Single racetrack burner delivers rapid heat
Underneath the stainless steel deck sits a single 14,000-BTU racetrack burner designed by Solo Stove to provide even edge-to-edge heating. The Flat Top King praised this specific layout for maintaining consistent temperatures across the entire oval surface, allowing butter and oils to melt uniformly without scorching in hot spots. This design allows the griddle to stay on low settings effectively while still providing enough raw power to handle high-heat searing tasks when the knob is turned up.
Seven-minute cold-to-sear performance
The Barbecue Lab conducted a rigorous heating test using a ThermoWorks weighted surface griddle probe to verify Solo Stove's claim that the unit reaches searing temperatures in seven minutes. After running for twelve minutes total, the surface peaked at 571°F, providing ample thermal mass for cooking.
Tabletop safety and portability metrics
Weighing in at just over 38 pounds, the Steelfire 22 is designed as a tabletop unit rather than a permanent outdoor fixture. The Barbecue Lab tested its heat output on various surfaces using an infrared thermometer to ensure it would not damage furniture during extended use. Measurements taken eight minutes into a high-heat run showed only a 76°F reading underneath the griddle, confirming that the base insulation is sufficient for safe operation on standard picnic tables or tailgate setups without melting plastic or scorching wood.
Propane tank adapter limitations
The unit comes equipped with a 1-pound propane tank adapter, making it highly convenient for camping trips where carrying heavy fuel is impractical. However, The Flat Top King pointed out that connecting the griddle to standard 20-pound propane tanks requires purchasing a separate long-nipple adapter because the included hose nipple does not match standard connections. This unique requirement forces users who want to run extended tailgates or campouts on bulk fuel to buy an additional part from Solo Stove, adding to the initial cost and setup complexity.
Smash burger searing capability
The Barbecue Lab put the rapid heat output to the test by cooking smash burgers on the Steelfire 22. Despite the single burner configuration, the unit produced a crust quality that reviewers described as equal to the results achieved on the dual-burner 30-inch model. The even heat distribution of the racetrack design ensured that all six patties developed a consistent sear after just one minute of cooking, proving that the smaller footprint does not sacrifice the restaurant-quality finish expected from high-end griddles.
Oval geometry impacts food placement
While the oval shape solves the cold corner problem found in rectangular competitors, it introduces a new challenge for users accustomed to traditional layouts. The Barbecue Lab noted that without corners or defined edges, determining where to place ingredients can be less intuitive during fast-paced cooking sessions. This lack of visual boundaries means cooks must rely more on temperature mapping and muscle memory rather than simply pushing food into the four quadrants of a standard rectangle.
Lid design enables steam cooking
Unlike many portable griddles that cannot handle the heat of a closed lid, the Steelfire 22 includes a sturdy cover that allows for covered cooking. The Flat Top King highlighted this feature as essential for steaming vegetables or melting cheese over burgers without removing them from the surface. This capability expands the unit's utility beyond simple frying and searing, making it a more versatile tool for outdoor breakfasts and lunch preparations where moisture retention is desired.
Strengths
- +Heats from cold to searing temperatures in approximately seven minutes, reaching over 460°F quickly.
- +Features a three-ply 304 stainless steel cooking surface that resists rust and requires no seasoning.
- +Racetrack burner layout provides even edge-to-edge heating for consistent cooking results.
- +Portable tabletop design weighs just under 38 lbs, making it easy to transport for camping or tailgating.
Watch-outs
- −Oval shape lacks corners and defined zones, which can make food placement less intuitive than rectangular griddles.
- −Includes only a single burner with lower total BTU output compared to the larger 30-inch model.
- −Requires purchasing a separate long-nipple adapter to connect to standard 20-lb propane tanks.
How it compares
The Steelfire 22 distinguishes itself with a three-ply 304 stainless steel surface that requires no seasoning, unlike the carbon steel surfaces of the Traeger Flatrock or Weber Slate 30 Inch Griddle. It is significantly lighter (~38 lbs) and more portable than all other listed griddles, though it offers only a single burner compared to the multi-burner configurations of competitors like the Blackstone Omnivore 28-inch.
Rating sources
“I fell in love with the griddle. Truly did. And I thought it was one of the top tier griddles that's ever been on the back porch.”
“At the flip, all six burgers got a great sear and it is equal to the results we got on the 30-in Steel Fire.”
Our 4.5 score is the average of the 3 scored reviews above; 1 more reviewed it without printing a score and is not in the average. Ratings marked * were derived from the reviewer’s written analysis or video transcript — the publisher didn’t print an explicit numeric score, so we inferred one from their own words. Click through to verify. More about methodology.