Verdict
All guidesResearchMethodologyAboutContact
Head-to-head · Best Laser Engravers

Ortur Laser Master 3 vs xTool P2 10W

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.
The short answer

xTool P2 10W comes out ahead by a clear margin (3.5 vs 4.3). The gap is mostly about users wanting robust performance — read the strengths below before deciding.

Ortur Laser Master 3
Ranked #7 in Best Laser Engravers
Ortur Laser Master 3
3 sources2 derived$388.06as of Jul 31

The Ortur Laser Master 3 uses a modern open-frame layout with integrated electronics and a 15.74" x 15.74" work area. Reviewers got good engraving and cutting results on wood, glass, aluminum, ceramic, and acrylic. Quality control is the problem. One reviewer received a damaged frame assembly that had been returned and re-shipped, hit a defective frame component and a troublesome WiFi setup, and flagged security concerns around unsecured FTP and TELNET servers. Buy it only if you're prepared to troubleshoot and tolerate build quality issues.

Strengths
  • — Open-frame design with integrated electronics for futuristic appearance
  • — Capable of engraving and cutting on multiple materials including wood, glass, aluminum, ceramic, and acrylic
  • — Work area of 15.74" x 15.74" (400 x 400 mm) suitable for medium-sized projects
Watch-outs
  • — Received defective frame component with cross-threaded set screw requiring manual repair
  • — WiFi connection issues reported with unstable initial setup and unsecured FTP/TELNET servers
  • — Included frame assembly showed signs of damage and returned part reuse
$388.06 · Check Price on AmazonFull review →
xTool P2 10W
Higher ratedRanked #1 in Best Laser Engravers
xTool P2 10W
4 sources3 derived$3,399as of Jul 31

The xTool P2 is a powerful 55-watt CO2 desktop laser cutter with tricks most rivals don't have, including curved engraving and automated AI batch engraving. CNET called it a potential Glowforge killer, and reviewer Chris Garrett came away impressed after a single day of testing. It ships fully enclosed with fume extraction and air assist built in, which makes it safer to run. It's aimed at people cutting thicker materials or wanting faster engraving speeds. Setup is involved, requiring distilled water and antifreeze, and the large footprint won't suit every workspace.

Strengths
  • — 55-watt CO2 laser provides substantial cutting and engraving power
  • — Built-in fume extraction and air assist for safer operation
  • — Curved Engraving feature automatically adjusts z-height for warped materials
Watch-outs
  • — Requires distilled water and included antifreeze before first use
  • — Machine size is substantial at 39.4×25.1×10.6 inches
$3,399 · Check Price on AmazonFull review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Ortur Laser Master 3

The Ortur Laser Master 3's open-frame design and integrated electronics distinguish it from the xTool D1 Pro's enclosed build, but it suffers from quality control issues and WiFi instability that the xTool P2 avoids. It also lacks the automated features and AI batch engraving capabilities of the xTool P2, though it offers a more affordable entry point.

xTool P2 10W

The xTool P2 stands out from the Glowforge Pro with its fully enclosed design and built-in fume extraction, features that the Glowforge lacks without an expensive add-on. Compared to the xTool D1 Pro, it offers more power with its 55-watt CO2 laser and includes advanced AI batch engraving, but requires more setup effort and has a larger footprint.

Specs side-by-side

SpecOrtur Laser Master 3xTool P2 10W
Work Area15.74" x 15.74" (400 x 400 mm)26.7×14.1 (680*360mm)
Max SpeedUp to 12,000 mm/min600mm/s
Machine Size23.1" x 25.9" x 5.9" (588 x 660 x 150 mm)39.4×25.1×10.6 (1000×639×268mm)
Weight14.3 lb99.2 lb
Laser Power20W55 Watt CO₂
Laser Typediode laserCO2 Laser
SoftwareOrtur's self-developed App, Lightburn, LaserGRBLxTool Creative Space / LightBurn
Materialstainless steelaluminum alloy
Dimensions—44.09 x 29.13 x 13.78 inches
← See the full ranking of best laser engravers