Head-to-head · Best Laser Engravers

Wainlux K10 vs xTool P3

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.

The short answer

xTool P3 comes out ahead by a clear margin (4.8 vs 4.1). The gap is mostly about High-volume producers needing large format cutting without splitting batches — read the strengths below before deciding.

Ranked #7 in Best Laser Engravers

Wainlux K10

4.1

4 sources1 derived$110as of Oct 1

The Wainlux K10 offers a compact, fully enclosed design that allows it to be held in one hand and used safely around children without glasses, as The Gadgeteer found the automatic shield shutdown effective. However, its 80mm x 80mm carving area significantly limits project scale, making it unsuitable for larger items or batch production. Poor Man's DIY noted that while the small footprint aids portability, users needing expansive workspace must look elsewhere. Additionally, the low 3W power restricts the machine to engraving rather than cutting thicker materials.

Strengths

— Compact and portable design allows the machine to be held in one hand and easily stored on a shelf.
— Fully enclosed chassis with an orange flip-down safety shield that automatically stops the laser when lifted or if tilted more than 13 degrees.
— CutLabX software is user-friendly, compatible with Windows, macOS, Android, and iOS, and supports offline engraving via microSD card.

Watch-outs

— Small 80mm x 80mm (3.15in) carving area limits the size of projects that can be engraved in a single pass.
— Low power output restricts the machine to engraving rather than cutting through thicker materials.
— WiFi connectivity disconnects the host device from internet access while connected to the laser's network.

$110 · Buy at wainlux.com Full review →

Higher ratedRanked #3 in Best Laser Engravers

xTool P3

4.8

4 sources1 derived$6,299as of Oct 1

The xTool P3 features a massive 915 by 458 millimeter working area that accommodates full sheets of material without splitting batches, according to hobbylasercutters. Its Automated Creation System uses four cameras and LiDAR for automatic bed leveling and autofocus, which Make or Break Shop described as the easiest industrial laser they have ever used due to its streamlined workflow. However, the machine weighs 105 kilograms, making it difficult to move without purchasing an optional mobile work stand. Initial optical path calibration can also be intimidating and time-consuming for beginners who are not familiar with mechanical alignment. This unit fits high-volume producers needing large format cutting but is likely too complex and heavy for casual hobbyists.

Strengths

— Massive 915 x 458 mm (36 x 18 inch) working area accommodates full sheets of material without splitting batches.
— Automated Creation System (ACS) integrates four cameras and LiDAR for automatic bed leveling, autofocus, and precise alignment.
— Interchangeable lens system includes Medium, Small, and Large options to optimize performance for engraving versus heavy cutting.

Watch-outs

— Heavy weight of 105 kg (230 lbs) makes the unit difficult to move without purchasing an optional mobile work stand.
— Initial optical path calibration can be intimidating and time-consuming, with some users reporting struggles during setup.

$6,299 · Check Price on Amazon Full review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Wainlux K10

The Wainlux K10’s extremely compact design allows it to be held in one hand, offering portability that the heavy xTool P2 or xTool P3 cannot match. However, its small 80mm x 80mm carving area is significantly more limited than the Creality Falcon A1 Pro's larger workspace, restricting users who need to engrave larger items in a single pass.

xTool P3

The xTool P3 features a massive 915 by 458 millimeter working area that accommodates full sheets of material, vastly exceeding the smaller beds of the Xtool S1 40W or Glowforge Aura. Its Automated Creation System simplifies alignment for high-volume production, though its immense 105kg weight makes it far less portable than lighter models like the Wainlux K10.

Specs side-by-side

Spec	Wainlux K10	xTool P3
Laser Power	3W (5W optional)	80W CO2
Working Area	3150 x 3150 in	36024 x 18031 in
Max Speed	3000mm/min	1200 mm/s
Machine Weight	1.57 kg	105 kg (230 lbs)
Connectivity	USB, WiFi, microSD	—
Laser Type	455nm (3W, 5W, 10W) / 1064nm (1W)	80W CO₂ laser cutter
Engraving Area	200 x 150 mm	915 x 458 mm
Machine Dimensions	—	36 × 18 (91.5 × 45.8 cm)
Accuracy	—	0.0079"

← See the full ranking of best laser engravers