Verdict
All guidesResearchOpen dataMethodologyAboutContact
Head-to-head · Best Laser Engravers

xTool F2 Ultra UV vs xTool P2

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.
The short answer

xTool P2 comes out ahead by a clear margin (4.9 vs 4.5). The gap is mostly about Serious makers needing industrial-grade power for thick material cutting in fixed workshops — read the strengths below before deciding.

xTool F2 Ultra UV
Ranked #4 in Best Laser Engravers
xTool F2 Ultra UV
6 sources$7,311.58as of Oct 1

The xTool F2 Ultra UV utilizes 355nm cold-processing technology to engrave heat-sensitive materials like chocolate and paper without charring or melting, while its interchangeable lens system enables embedded 3D crystal work. Hobbylasercutters highlighted this unique inner engraving capability as a standout feature for the machine. However, the device operates exclusively within the closed xTool Studio ecosystem, which lacks compatibility with third-party tools like LightBurn, and its material preset library is incomplete, requiring manual tuning for many substrates. Hackster.io noted that this software restriction may be a dealbreaker for some users. This laser suits makers who prioritize thermal-free precision on delicate items over open-source workflow flexibility.

Strengths
  • — Cold-processing UV technology at 355nm enables photochemical ablation that engraves without burning, charring, or melting heat-sensitive materials like chocolate and paper.
  • — Capable of embedded 3D inner crystal glass engraving using a specialized interchangeable lens and precision pedestal stand included in the package.
  • — Features dual 48-megapixel internal cameras that provide accurate positioning down to approximately 0.2 mm and support auto-focus workflows.
Watch-outs
  • — The xTool Studio software ecosystem is closed, offering no compatibility with third-party tools like LightBurn which many makers prefer.
  • — The material preset library in the software is incomplete, requiring users to manually dial in settings for many specific materials not listed by default.
$7,311.58 · Check Price on AmazonFull review →
xTool P2
Higher ratedRanked #2 in Best Laser Engravers
xTool P2
6 sources$139as of Oct 1

The xTool P2 delivers high-power 55W CO2 laser cutting capable of slicing through 20mm wood and acrylic in a single pass, as uniquecreationsbyanita found it handles thick substrates cleanly. Its fully enclosed design with a pneumatic lid and 145CFM exhaust fan effectively manages fumes, while dual cameras aid precise positioning. However, the machine is heavy at 45kg, requiring a permanent dedicated workspace that cannot be easily moved or stored away. Additionally, advanced features like curved surface mapping are exclusive to the native xTool Creative Space software, limiting users who prefer third-party tools like LightBurn. This model fits serious makers needing industrial-grade power and safety for fixed workshops, but it is unsuitable for those with limited space or a preference for portable setups.

Strengths
  • — 55W CO2 glass laser tube delivers high power capable of cutting up to 20mm thick wood and acrylic in a single pass, per Unique Creations by Anita.
  • — Fully enclosed safety design with a locked pneumatic lid prevents fume leaks and laser exposure during operation.
  • — Comes standard with built-in air assist and a powerful 145CFM exhaust fan to manage smoke and improve cut quality, per MakerHacks.
Watch-outs
  • — Heavy at 45kg (99 lbs) and large in footprint, requiring a permanent dedicated workspace or heavy-duty table.
  • — Requires manual filling of the water-cooling system with distilled water and antifreeze before initial use, MakerHacks notes.
  • — Exclusive advanced features like curved surface mapping are only available when using the native xTool Creative Space software, per Unique Creations by Anita.
$139 · Check Price on AmazonFull review →

How they stack up

xTool F2 Ultra UV

The xTool F2 Ultra UV uses cold-processing UV technology to engrave heat-sensitive materials like chocolate without charring, a capability the standard diode lasers in the Glowforge Aura or Creality Falcon A1 Pro lack. Although it offers precise 0.2mm positioning via dual cameras, its closed software ecosystem restricts third-party tool compatibility unlike the open workflows preferred by many makers.

xTool P2

The xTool P2 delivers high-power 55W CO2 cutting capable of slicing through 20mm wood, significantly outperforming the lower-wattage diode lasers in the Xtool S1 40W or Glowforge Aura. However, its heavy 45kg weight and large footprint require a dedicated permanent workspace, making it unsuitable for those seeking the portability of the Wainlux K10.

Specs side-by-side

SpecxTool F2 Ultra UVxTool P2
Laser Power5W55W CO2 Glass Laser Tube
Laser Type5W UV laserCO2
Working Area7874 x 7874 in23622 x 12008 in
Max Speed15,000 mm/sec600mm/s
Machine Weightaround 50 pounds45kg (99 lbs)
ConnectivityWindows and macOSWi-Fi, USB-C, Ethernet
Machine Dimensions294 mm × 429 mm × 520 mm1000 x 639 x 268mm
Engraving Area200 mm × 200 mm23.6" x 12"
Accuracy—0.001 inches
← See the full ranking of best laser engravers