Head-to-head · Best Laser Engravers

Wainlux K10 vs xTool P2

Which is the better buy? Side-by-side on rating, price, strengths, and watch-outs — with the published ratings we averaged to get there.

Verdict is reader-supported. As an Amazon Associate we earn from qualifying purchases. Some links on this page are affiliate links — if you click through and buy, we may earn a small commission at no extra cost to you. Our ratings are sourced from independent publications, not sponsors.

The short answer

xTool P2 comes out ahead by a clear margin (4.9 vs 4.1). The gap is mostly about Serious makers needing industrial-grade power for thick material cutting in fixed workshops — read the strengths below before deciding.

Ranked #7 in Best Laser Engravers

Wainlux K10

4.1

4 sources1 derived$110as of Oct 1

The Wainlux K10 offers a compact, fully enclosed design that allows it to be held in one hand and used safely around children without glasses, as The Gadgeteer found the automatic shield shutdown effective. However, its 80mm x 80mm carving area significantly limits project scale, making it unsuitable for larger items or batch production. Poor Man's DIY noted that while the small footprint aids portability, users needing expansive workspace must look elsewhere. Additionally, the low 3W power restricts the machine to engraving rather than cutting thicker materials.

Strengths

— Compact and portable design allows the machine to be held in one hand and easily stored on a shelf.
— Fully enclosed chassis with an orange flip-down safety shield that automatically stops the laser when lifted or if tilted more than 13 degrees.
— CutLabX software is user-friendly, compatible with Windows, macOS, Android, and iOS, and supports offline engraving via microSD card.

Watch-outs

— Small 80mm x 80mm (3.15in) carving area limits the size of projects that can be engraved in a single pass.
— Low power output restricts the machine to engraving rather than cutting through thicker materials.
— WiFi connectivity disconnects the host device from internet access while connected to the laser's network.

$110 · Buy at wainlux.com Full review →

Higher ratedRanked #2 in Best Laser Engravers

xTool P2

4.9

6 sources$139as of Oct 1

The xTool P2 delivers high-power 55W CO2 laser cutting capable of slicing through 20mm wood and acrylic in a single pass, as uniquecreationsbyanita found it handles thick substrates cleanly. Its fully enclosed design with a pneumatic lid and 145CFM exhaust fan effectively manages fumes, while dual cameras aid precise positioning. However, the machine is heavy at 45kg, requiring a permanent dedicated workspace that cannot be easily moved or stored away. Additionally, advanced features like curved surface mapping are exclusive to the native xTool Creative Space software, limiting users who prefer third-party tools like LightBurn. This model fits serious makers needing industrial-grade power and safety for fixed workshops, but it is unsuitable for those with limited space or a preference for portable setups.

Strengths

— 55W CO2 glass laser tube delivers high power capable of cutting up to 20mm thick wood and acrylic in a single pass, per Unique Creations by Anita.
— Fully enclosed safety design with a locked pneumatic lid prevents fume leaks and laser exposure during operation.
— Comes standard with built-in air assist and a powerful 145CFM exhaust fan to manage smoke and improve cut quality, per MakerHacks.

Watch-outs

— Heavy at 45kg (99 lbs) and large in footprint, requiring a permanent dedicated workspace or heavy-duty table.
— Requires manual filling of the water-cooling system with distilled water and antifreeze before initial use, MakerHacks notes.
— Exclusive advanced features like curved surface mapping are only available when using the native xTool Creative Space software, per Unique Creations by Anita.

$139 · Check Price on Amazon Full review →

Derived means the reviewer published no score, so one was inferred from their written verdict. Everything else is a number the publisher printed. How we rank.

How they stack up

Wainlux K10

The Wainlux K10’s extremely compact design allows it to be held in one hand, offering portability that the heavy xTool P2 or xTool P3 cannot match. However, its small 80mm x 80mm carving area is significantly more limited than the Creality Falcon A1 Pro's larger workspace, restricting users who need to engrave larger items in a single pass.

xTool P2

The xTool P2 delivers high-power 55W CO2 cutting capable of slicing through 20mm wood, significantly outperforming the lower-wattage diode lasers in the Xtool S1 40W or Glowforge Aura. However, its heavy 45kg weight and large footprint require a dedicated permanent workspace, making it unsuitable for those seeking the portability of the Wainlux K10.

Specs side-by-side

Spec	Wainlux K10	xTool P2
Laser Power	3W (5W optional)	55W CO2 Glass Laser Tube
Working Area	3150 x 3150 in	23622 x 12008 in
Max Speed	3000mm/min	600mm/s
Machine Weight	1.57 kg	45kg (99 lbs)
Connectivity	USB, WiFi, microSD	Wi-Fi, USB-C, Ethernet
Laser Type	455nm (3W, 5W, 10W) / 1064nm (1W)	CO2
Engraving Area	200 x 150 mm	23.6" x 12"
Machine Dimensions	—	1000 x 639 x 268mm
Accuracy	—	0.001 inches

← See the full ranking of best laser engravers